Telcoma Automations NOIRE 2, Руководство по эксплуатации

Страница: 34 / 56

rised radio control, and the respective relay is activated.
- Simultaneous blinking of all the LEDs: during programming this
indicates that a transmitter that is already enabled is being mem-
orised.
- Alternate blinking of the LEDs: during programming this indicates
that the storage is full.
A series of options to operation of the relay output in the receivers
are available, which makes them versatile.
Attention! Do not set options given in this section with button P1
of the TANGO SR / NOIRE SR receiver.
1. Single-step output
- During programming press key P2 twice
instead of once as described in paragraph 2
under the heading “Standard programming”.
- The led related to the pressed button gives 5
series of two blinks.
- During this stage, transmit with a transmitter from the TANGO /
NOIRE range.
- A fixed led light for a few moments indicates that memorisation
has been successful. The P2 output is now single-step. The output
has no magnetic hold, so if there is a power failure while the relay
is activated, the latter deactivates.
2. Timer output
- Press the key P2 3 times during programming.
- The led related to the pressed button gives 5
series of three blinks.
- During this stage, transmit with a transmitter
from the TANGO / NOIRE range.
GB
P2 L2
3
(P3 - L3)
(P4 - L4)
P2 L2
2
(P3 - L3)
(P4 - L4)
ADVANCED PROGRAMMING
34