Telcom Research CallShop FONE DISPLAY, Инструкция по установке и протоколу

Страница: 7 / 24

A7- 3375 North Service Road, Burlington ON Canada L7N 3G2
Phone +905.336.2450
Fax +647-436-6954
Web www.telcomresearch.com
Page 6
D = Delimiter (character between seconds and minutes)
X = Optional command. If this is a “C” then the counter is cleared.
Response:
^D <CR>
The CallShop Fone Display will respond with this confirmation message
Example:
D101:C
<CR>
Display a duration timer on Row 1 at column 1 with a “:” between the
minutes and seconds. The display will look like this:
000:00
D000:
<CR>
This will cause the duration counter to be removed from the LCD display.
Duration Start/Stop:
The “d” (lower case “D”) command is used to start and stop the Duration Counter.
Format:
dxy <CR>
d = “d”
x = Enable / Disable
1 = Enable
0 = Disable
y = Optional command. If this character is a “C” then the counter
will also be reset to zero.
Response:
^d <CR>
The CallShop Fone Display will respond with this confirmation message
Example:
d1 <CR>
This causes the duration counter to begin counting up.
d0 <CR>
This causes the duration counter to stop counting. The d1 command will then
allow you to turn the counter back on.
Cost Counter:
The “C” command will place a Cost Counter on the LCD at the location of your choice. A cost
counter will allow you to display the cost of the call incrementing automatically without the
need to constantly update the LCD display.
Format:
CRCCLDdSTTAAx <CR>
C = “C”
R = Row ( 1 or 2 )
CC = Column ( 1 to 16 )
L = Length of the field
D = Decimal Places
d = Delimiter character.
S = Currency Symbol. Can be any