TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
18
2.4.5
Powering Up
The TSBC3000 series is furnished with two AC or DC power connections. Only once all other
equipment installation work is completed should the TSBC3000 series be turned on.
2.4.5.1
Connecting to AC Power
Prerequisites
To power the TSBC3000 series, you will need:
•
Two power sources.
•
Two power cables for the TSBC3000 series.
To connect to AC Power:
1. Connect an AC power cable to each AC connector of the TSBC3000 series and an AC supply. See
Note
It is important to connect both power supplies in order to avoid setting off the audible alarm.
Figure
2.6
AC Power Connection
AC
Power
Source 1
AC
Power
Source 2
15
14
13
12
10 11
8
9
3
2
0
7
6
5
4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
Содержание TSBC3000
Страница 1: ...Installation Guide TSBC3000 Session Border Controller August 31 2016...
Страница 41: ...35 Installing the Equipment 3 Select a host from the Host Configuration List 4 Select the Status tab...
Страница 50: ...TSBC3000 Series Standalone and TSBC3000 Series 1 1 System Installation Guide 44...