- 34 -
NAT
Enable this option if the User or Phone is located
behind a NAT (Network Address Translation)
enabled gateway.
VM Password
Voicemail Password for this user, eg: "1234".
Delete VMessage
Voicemail will not be checkable by phone if you
chose this option. Messages will be sent by e-mail
only. Note:you must configure SMTP server for this
functionality.
Global Analog Settings
Click
【
Options
】
---
【
Global Analog Settings
】
to see the following diagram:
Item
Explaination
Caller ID Detection
For FXO trunk lines,this option causes PBX to look
for Caller ID on incoming calls
Caller ID Signalling
This option allows you to choose the type of Caller
ID signalling to use.
Bell-US-- Used in the United States;
DTMF-- Used for callerID under DTMF mode.(eg: