Telair Iceberg 3500 Скачать руководство пользователя страница 4

GB

- 4 -

 

1

  FOREWORD

  Refer carefully to this manual

before performing any operation on the air con-
ditioner.

1.1 Purpose and scope of this manual

This manual has been drawn up by the Manufac-
turer in order to provide basic information and in-
structions for performing every operation for serv-
icing and using the air conditioner in a proper and
safe manner.
It is an integral part of the conditioner equipment
should be kept clean and safe  throughout its
working life.
It must follow the conditioner if the latter is installed
on a new vehicle, or if its ownership changes hands.
The information in this manual is addressed to the
personnel which must install the air conditioner, and
to all those involved in its maintenance and use.
This manual sets out the purpose the machine was
designed for, and contains all the information re-
quired to guarantee that it is used in a safe and
proper fashion.
Constant attention to the instructions laid down here
will guarantee the safety of the user, economy and
longer life of the machine.
To facilitate reference, this manual has been sub-
divided into chapters which specify the main no-
tions; for quick consultation, refer to the table of
contents.
The most important parts of the text are in bold
letters and preceded by symbols described below.
Please read the contents of this manual carefully.
This is the only way to ensure that the air condi-
tioner will work properly through time and be reli-
able, while safeguarding people and things.

Note:

 

The information contained in this publication

was correct at the time it went to print, but may be
modified without advance notice.

MANUAL

1.2 Symbols and Definitions

This means that you must pay at-

tention to avoid serious consequences which might
lead to the death of the operators or at least to pos-
sible damage to their health.

This means a situation which

could take place during the lifetime of a product,
system or installation, and which is considered to
be hazardous in terms of damage to people, prop-
erty, the environment or financial loss.

 This means you must pay atten-

tion in order not to incur serious consequences
which might lead to damage to material goods, such
as resources or the product itself.

 Especially important instructions.

The drawings are only provided by way of exam-
ple.
Even though the machine you actually have may
differ from the illustrations contained in this manual,
safety and information about the same are guaran-
teed.

The manufacturer, as part of his policy of constant
development and updating, may effect changes
without providing advance notice.

1.3 General Information

The 

ICEBERG 3500

 air conditioners have been

designed for installation on the roofs of vehicles.
They run on 230 VAC 50 Hz alternate current power
supply.

The power supply must never

fall below 210 VAC, and the frequency must stay
steadily at 50 Hz.

The use of air conditioners at a different voltage
from the above would compromise their good per-
formance and could also be dangerous for the in-
tegrity of the equipment.

Содержание Iceberg 3500

























Отзывы: