Telair ice S2800, Руководство по установке и инструкция пользователя

Страница: 14 / 28

ICE S 2800 Rev.001
14
8 - +HOUR and
–
HOUR to adjust the time on
the remote control and the timer function
start/stop times.
9 - CLEAR to delete timer function
programming.
10 - SET to enter time adjustment mode on
the remote control or confirm the timer
function start/stop times.
11
–
KEY/RESET to reset the remote control
completely.
12
–
RGB COLOR , function currently
unavailable.
13
–
COLD/HEAT , immediately switches
operating mode from hot to cold and vice
versa.
14
–
LIGHT ON/OFF , lets the user switch the
courtesy light on the diffuser on/off.
5.7 Remote Control Display
1. Automatic mode
2. Cool operating mode
3. Warm operating mode
4. Ventilation mode
5. Timer: start time (only visible if the timer
has been activated)
6. Timer: stop time (only visible if the timer
has been activated)
7. System time
8. Temperature setting
9. Courtesy light on indicator
10. Fan speed setting indicator (when AUTO
is displayed the speed is automatically
controlled by the air conditioner)
11. Data transmission indicator
5.8 Diffuser Display
The diffuser has a display which also
contains the IR remote control receiver.
When the air conditioner is powered by the
mains but is off, the display shows only room
temperature in the first field (Fig. 20 ref. 1)
When the air conditioner is on, the central
field (Fig. 20 ref. 2) shows the symbols that
describe operating mode:
- Ice crystal = COOL mode
- Sun = WARM mode
- Ice c Sun = AUTOMATIC mode
5
6
1
2 3 4
11
7
8
10
9
1
2
3