TEL TAVRIDA ELECTRIC VCB15 LD, Руководство пользователя

Страница: 38 / 93

39
4.1.7 Installation of HD ISM main contacts position indicator
The installation of the main contacts position indicator is shown below. (Figure 59 - Figure 62). The ISM shall be
in the Closed position.
Note: The bending radius of the flexible rod shall be not less than 40 mm.
There are two possibilities (left, right)
to connect the flexible rod. Figure 59
Unscrew the self-tapping screws of the
transparent cover and remove it.
Figure 60
Drop the boss of the wire horizontally into
the slot. Insert the end of the sheath into the
V-shape spring contact.
Figure 61
Return the cover and fasten it to the ISM.