Introduction
Tel-Atomic's new pocket size TeslaMeter 2000 is unique for the features offered. The Sensor
will measure axial or transverse magnetic fields up to 2000 mT, and can be set for Auto- range.
However, if one of the 3 manual ranges is selected, an analog output of 2.5 volts for FSD of each
range is possible, making it easy to use with a computer interface.
With the 4 ½ Digit LCD readout you can use the sensor as a stand-alone Magnetic field meter.
In addition, the sensor is provided with a USB digital input/output so you can connect it directly
to your computer.
An EEPROM inside the probe has been programmed for temperature compensation of non-
linearity error. Following a patented method, the unit removes temperature effects of magnetic
sensitivity, resistive residual voltage and also all magneto resistive effects. If necessary, the unit
can be re-calibrated easily with the help of the zero-gauss chamber.
The TeslaMeter 2000 comes with complete operating instructions, an axial and transverse probe,
the zero-gauss chamber as well as an external power supply.
Specifications
Measurement Ranges:
±19.999 mT,
1
µ
T resolution
±1999.99 mT,
10 μT resolution
±1999.9 mT,
100μT resolution
Measured value mode:
Constant Magnetic Field [mT]
Alternating Magnetic Field up to 500Hz in RMS [mT]
Magnetic Field Sensor:
Hall Effect GaAs type sensor
Measurement Probes:
Axial and Radial,
12.5mm long,
100cm cable with 9 pin "D” type male connector
DC Range Accuracy:
± 0.05% on each range
AC Range Accuracy:
± 0.2% on each range
Resolution:
.001mT
Range selection:
Manual, Auto
Digital data format:
ASCII data
[±XX,XXmT”CR””LF”], [±XXX,XmT”CR””LF”], [±XXXXmT”CR””LF”]
Analog output:
± 2.5V max. resolution 128 bit per ±2000mT
Measuring utilities:
Zero the hall sensor with the "Zero Gauss Chamber”.
Set offset readout for the current field.
Non-Volatile memory for caching the "last used”
measurement range and mode.
User buttons:
Power:
on / off
Measurement mode:
ac / dc
Measurement range:
2000mT, 200mT, 20mT, AUTO
Zeroing:
readout offset / sensor zero
Power Off:
Manual or Auto after 10 min.
Power On:
Manual
Total Weight:
200g (including batteries)
Dimensions (HxWxD):
130mm x 75mm x 26mm
Display:
4 1/2 digit LCD
Readout frequency:
4 Hz
External power supply:
12V, 100mA, DC 2mm power jack
Supply:
4 x R3 (AAA) type cells
