4. Front and Rear Panel Description
4.1 Front Panel Operation
No.
Name
Description
①
Firmware
Micro USB port for update firmware.
②
Power
Indicator
Keep light when power on.
③
IR Receiver
Receive control signal from IR remote.
④
LCD
Indicator
Real-time shows system status.
⑤
INPUTS/
Menu
buttons
Normal mode: Input buttons, ranging from "1" to "4".
Inquire mode: Press
“AV” more than 3 seconds to enter this mode.
to change different menus,
to change different channels.
⑥
Function
buttons
AV
button: To transfer AV and IR signal synchronously by the switcher.
Example
: To transfer both AV and IR signals from input channel No.1 to
output channel No.3.
Operation
: Press buttons in this order “1”, “AV”, “3”.
ALL
outputs button: To transfer one input to all outputs.
Example
: To transfer both AV and IR signals from input channel No.1 to
all output channels.
Operation
: Press buttons in this order “1”, “ALL”
EDID
management button: manually capture and copy the EDID data from
an HDBaseT output device to input port. Do not use the Local HDMI
outputs.
Example
: To capture and copy the EDID data from output channel No.4
to input channel No.2.
Operation
: Press buttons in this order “EDID”, “2”, “4”
⑦
OUTPUTS
Output buttons, ranging from "1" to "4".
To control the matrix from the front panel controls do the following:
“Input Channel” + “AV” + “Output Channel”
“Input Channel”: Fill with the number of input channel to be controlled.
“Output Channel”: Fill with the number of output channels to be controlled.
