TEK-MHD44TP 4x4 HDBaseT Matrix
TEKVOX, INC.
17
www.tekvox.com
210.348.6565
Control Display or 3rd-Party Device from Local
From a control system connected to the 9 pin female RS-232 port on the HDBaseT matrix use the
embedded RS-232 command
“
/+[Y]/[X]:******.
” to send data to a device at the HDBaseT receiver.
This method does not allow for bi-directional control.
Please reference to the detailed command description
in 6.3.1 RS-232 Commands.
Control far-end device from local
Connect the RS-232 (3P captive screw) port in one zone to PC, and connect the controlled RS-232
device (3rd party device) to the corresponding (same zone as PC) receiver. This method allows for bi-
directionally RS-232 data between controller and device at receiver.
