How To Guide
www.tektronix.com/products/video_test/
6
How to set-up the Spearhead display in the WFM8300
Option PROD required
Note:
For the purpose of this description I have used a 4-Tile screen setup but you could do this in the Full Screen Mode as well.
How to Configure Spearhead Display
1. Select one of the tiles (1,2,3 or 4) and press the
GAMUT
button.
2. Push and Hold the
GAMUT
button to enable the menu.
3. The menus should so the
Display Type
navigate using the up and down arrow keys or the general know to the
Spearhead selection.
You can also save this as a Preset by Depressing the
PRESET
Button and then selecting the location you want to save it to.
After saving the preset you can rename it as shown in this example.
Figure 8.
WFM8300 Front Panel.