Tektronix TLA7AA Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 116

background image

Performance Verification

TLA7AXX/TLA7NAX Logic Analyzer Module Service Manual

4- 3

The following procedure checks the basic functionality of the logic analyzer
module. You can perform this procedure with individual modules or with merged
modules. Functional verification consists of running the extended diagnostics.

NOTE

. Running the extended diagnostics invalidates any acquired data. If you

want to save any of the acquired data, do so before running the extended
diagnostics.

Perform the following steps to complete the functional verification procedures:

1.

Disconnect any probes connected to the logic analyzer module.

2.

In the logic analyzer application, go to the System menu and select
Calibration and Diagnostics.

3.

Click the Extended Diagnostics tab.

4.

Select the top level test and click the Run button.

The diagnostics will perform each one of the tests listed in the menu under
the module selection. All tests that displayed an Unknown status will change
to a Pass or Fail status depending on the outcome of the tests.

5.

Scroll through the test results and verify all tests pass.

NOTE

. If the extended diagnostics fail, run the self calibration procedures as

described under

Self Calibration

beginning on page 5--1 for the logic analyzer

module under test and then rerun the extended diagnostics.

To perform a functional test on your logic analyzer probes, use a
NEX--PROBETESTER2 from Nexus Technology. Follow the procedure listed
for a functional test in the NEX--PROBETESTER2 manual. For more informa-
tion, see the Nexus Technology Web site at www.busboards.com.

To have Tektronix service perform the performance verification procedures,
which will verify that the logic analyzer and the attached probes meet or exceed
the advertised specifications, refer to

Service Options

on page 7--3.

Logic Analyzer Module

Functional Verification

Procedure

Probe Functional

Verification

«
...
50
51
52
53
54
...
»

Содержание TLA7AA Series





















































































































Отзывы:

Нет отзывов

Похожие инструкции для TLA7AA Series

Бренд: ECC X-RAY Страницы: 14

Бренд: Van Walt Страницы: 2

Бренд: Datavideo Страницы: 26

Бренд: Datcon Страницы: 84

Бренд: Wavetek Страницы: 43

Бренд: OHAUS Страницы: 52

Бренд: Maico Страницы: 27

Бренд: Magnescale Страницы: 14

Бренд: Valhalla Scientific Страницы: 43

Бренд: Keithley Страницы: 31

Бренд: Keithley Страницы: 63

Бренд: Keithley Страницы: 18

Бренд: Keithley Страницы: 73

Бренд: Parker Страницы: 16

Бренд: Waterproof Страницы: 51

Бренд: Velleman Страницы: 15

Бренд: Konica Minolta Страницы: 42

Бренд: Kobold Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды