Installation Instructions
12
TLA7012 Portable Logic Analyzer Rackmount Kit Instructions
WARNING.
To prevent the rackmounted instrument from tipping forward onto the
operator, install the instrument so that the operator will be able to access all of
its rear-panel connectors without pushing down on the instrument.
Verify that the rack does not become unstable with the instrument fully extended.
Do not leave the instrument extended when finished accessing the rear panel.
Assemble Shelf
Begin the installation procedure by attaching the brackets to the track assembly:
1.
Remove the mounting screw that is attached to each track. (See Figure 5).
2.
Mount one bracket to the front of each track assembly using two 8-32
flathead screws for each bracket. You must slide the rail within the track
assembly to gain access to the mounting screws and holes. See the latch
detail in Figure 6 on page 13).
Flat head screw
Mounting screw
Bracket
Figure 5: Preparing the track assembly
