TLA7012 Portable Logic Analyzer Rackmount Kit Instructions
11
Installation Instructions
This section contains all procedures needed to rackmount the TLA7012
instrument.
CAUTION.
This kit requires you to remove the right-side panel of the instrument
rack you intend to use. You must have access to the right side of your instrument
to connect the logic analyzer probes when the instrument is installed in the rack .
Minimum Tool and Equipment List
The following tools are required to attach the rack-adapter kit hardware, install
cabling hardware, and mount the rack-adapted instrument into a standard
equipment cabinet. All tools are standard tools that are readily available.
Table 2: Tools required for rackmount installation
Item
no.
Name
Description
1
Screwdriver handle
(magnetic)
Accepts 1/4-inch hexagonal head driver tips
2
No. 2 Phillips or
Pozidriv tip
Phillips or Pozidriv-driver tip for number 2 size screw heads
3
T-15 Torx tip
Torx-driver tip for T-15 size screw heads
4
11/32-inch wrench
Wrench or nut driver can be used to install slides
5
Torque driver
Accepts 1/4-inch hexagonal head driver tips
These instructions are for personnel who are familiar with servicing the product.
If you need further details for disassembling or reassembling the product, refer to
the appropriate product manual. Contact your nearest Tektronix Service Center
or Tektronix Factory Service for installation assistance.
