Tektronix TDS1001C-EDU, Руководство по обслуживанию

Страница: 25 / 114

Speci fi cations
Table 3: Triggering system (cont.)
Frequency
Counter
Resolution 6 digits
Frequency
Counter Accuracy,
typical ±51 ppm including all reference errors and ±1 count errors.
Frequency
Counter
Frequency Range,
typical AC coupled. 10 Hz minimum to rated bandwidth.
Pulse width or edge selected trigger source. Frequency
Counter Signal
Source
Frequency counter measures selected trigger source at all times in pulse width and edge mode, including
when oscilloscope acquisition is halted due to changes in run status, or acquisition of a single shot
event has completed.
Frequency counter does NOT measure pulses that do not qualify as legitimate trigger events.
Pulse Width mode: Counts pulses of suf
fi cient magnitude inside the 250 ms measurement window
that qualify as triggerable events (for example, all narrow pulses in a PWM pulse train if set to < mode
and the limit is set to a relatively small number).
Edge Trigger mode: Counts all pulses of suf
fi cient magnitude.
Display Speci fi cations
Table 4: Display speci fi cations
Characteristic Description
Display Type 11.5 cm (width) * 8.64 cm (height), 14.3 cm diagonal (5.7”), QVGA, active TFT color liquid crystal display
(LCD) with color characters/waveforms on a black background. Surface antiglare (3H) treatment.
This is the number of individually addressable pixels
320 horizontal by 240 vertical pixels
Display Resolution
The video display contains both the character and waveform displays.
This is the light output of the backlight. Brightness, typical
400 cd/m
2
, typical. 320 cd/m
2
min.
Contrast Ratio and
Control, typical Available black room contrast ratio, full black to full white. 400 minimum, 500 typical.
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual 13