Tektronix TCR801, Инструкции по установке и безопасности

Страница: 16 / 67

Installation
Installation
The TCR801 hardware can be installed as follows under the listed performance
conditions and power specifications. Ensure the performance conditions listed
here can be met before installing and powering on the instrument.
The Tektronix Optical Clock Recovery (OCR) software application you use to
control the instrument should be installed onto a Microsoft Windows OS PC. You
can also control the instrument without the application by using PI commands.
Requirements
The following requirements must be met to install the OCR application and to
connect and use the instrument.
PC requirements for
OCR software application
installation
Microsoft Windows 7 and above OS
Power speci fi cations
12 V DC input
Line 90-264 VAC power input
Key environmental and
physical speci fi cations
Characteristic Speci fi cation
Temperature
Operating 0°C to +40°C, with 15°C/hour maximum gradient, non-condensing, derated 1.0 °C per 300
meters above 1,500 meters altitude.
Non-operating -20°C to +60°C, with 30°C/hour maximum gradient
Humidity
Operating 5% to 95% relative humidity ( RH) at up to +30°C,
5% to 45% RH above +30°C up to +45°C, non-condensing, and as limited by a Maximum
Wet-Bulb Temperature of +29°C (derates relative humidity to 32% RH at +45°C)
Non-operating 5% to 95% RH at up to +30°C,
5% to 45% RH above +30°C up to +60°C, non-condensing, and as limited by a Maximum
Wet-Bulb Temperature of +29°C (derates relative humidity to 20% RH at +60°C)
Altitude
Operating Up to 3,000 meters, derate maximum operating temperature by 1°C per 300 meters above
1,500 meters altitude.
Non-operating Up to 12,000 meters
10 TCR801 Installation and Safety Instructions