Tektronix TCR801, Инструкции по установке и безопасности

Страница: 13 / 67

Introduction to the TCR801
Introduction to the TCR801
The TCR801 Optical Clock Recovery is a dual band clock recovery instrument
centered around 26 and 53 GBd. The advanced architecture of the TCR801 allows
you to adjust Phase Lock Loop (PLL) bandwidths to comply with standards, and
is a crucial component in the test and validation of optical designs, when used
with other testing and measuring instruments.
Key features
Designed to lock in two ranges:
25.6 to 29 GBd PAM2 / NRZ or PAM4
51.2 to 58 GBd PAM2 / NRZ or PAM4
1250 nm to 1650 nm wavelength
Adjustable PLL bandwidths to configure the “golden PLL” response needed
for standard compliance testing
IEEE Ethernet Control Interface, which runs the instrument remotely
over the network using the standalone PC software or through PI using
VISA/Tek-VISA.
Provides two separate RF clock outputs
Intelligent auto relock capability and manual re-lock functionality available
from the instrument front panel
2 x 20 LCD is used to view network IP address and current lock status,
including the measured symbol rate
Ethernet port for device control
USB Type B port for reset of IP configuration
External 12 V power supply
Standard accessories
Your instrument shipped with the following standard accessories. See the TCR801
datasheet on www.tek.com for a list of optional accessories and other options.
Description Quantity Tektronix part number
Ethernet cable, 2 m (CAT6 GIGE),
double shielded 1 174-7292-00
50%/50% single mode FC-PC
splitter 1 167-4333-00
50 Ω coaxial SMA terminators 2 015-1022-01
TCR801 Installation and Safety Instructions 7