Tektronix TAP1500 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 65

background image

Warranty

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If
any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts
and labor, or will provide a replacement in exchange for the defective product. Parts, modules and replacement products used by Tektronix for
warranty work may be new or reconditioned to like new performance. All replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty period and make
suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective product to the service
center designated by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a
location within the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties,
taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. Tektronix
shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than Tektronix
representatives to install, repair or service the product; b) to repair damage resulting from improper use or connection to incompatible equipment; c) to
repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modi

fi

ed or integrated with

other products when the effect of such modi

fi

cation or integration increases the time or dif

fi

culty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY
PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
[W2 – 15AUG04]

«
...
3
4
5
6
7
...
»

Содержание TAP1500


































































Отзывы:

Нет отзывов

Похожие инструкции для TAP1500

Бренд: Bamo Страницы: 8

Бренд: IFR Страницы: 46

Бренд: Oldham Страницы: 34

Бренд: YOKOGAWA Страницы: 16

Бренд: YOSensi Страницы: 26

Бренд: YOSensi Страницы: 26

Бренд: Jenoptik Страницы: 54

Universal Analyzers 275E

Бренд: Ametek Страницы: 34

Бренд: Topcon Страницы: 59

Бренд: SANKO Страницы: 97

Бренд: Staco Energy Страницы: 2

Бренд: Hanna Instruments Страницы: 28

CVM-MINI-Ethernet Series

Бренд: Circutor Страницы: 3

BAE LX-XO-PL018-L S4 Series

Бренд: Balluff Страницы: 2

Бренд: LaserLine Страницы: 11

Бренд: 3nh Страницы: 32

Heinrichs Coriolis Mass Flow Meter

Бренд: Kobold Страницы: 118

Бренд: PCB Piezotronics Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды