Installation instructions
3.
Remove the two T15 Torx-head screws that secure the plastic carrying handle
to the side of the instrument. (It is not necessary to remove the black metal
handles.) (See Figure 1.)
4.
Remove four T15 Torx-head screws along each side that secure the top and
bottom covers to the instrument, and two T20 Torx-head screws near the front
edge of the top cover (next to the folding handles).
NOTE.
Early models of the RSA5100A Series instruments used four 5/32
″
Allen
socket cap screws in place of the T15 Torx-head screws.
5.
Remove the top and bottom covers. Remove the top cover by pulling straight
back about 1 inch. Then pull out on the sides of the top cover outward,
fl
exing them slightly to clear the instrument chassis, and pull it away from the
instrument.
6.
Remove the eighteen T15 Torx-head screws that secure the top shield to the
chassis and remove the shield.
RSA5100A/B Series Digital I/Q and Zero Span Upgrades
5
