Tektronix RFM220, Руководство пользователя

Страница: 30 / 116

Getting Started
RFM220 Aggregator applicaton.
The RFM220 Aggregator application collects
and stores data from RFM220 instruments and makes the data available to
RFM220 Clients that connect to the Aggregator.
The RFM220 Aggregator can reside on a PC or on a network server. The
typical RFM220 system installation will have the RFM220 Aggregator
installed on a network server, where it can be accessed by remote PCs with the
RFM220 Client application installed.
The RFM220 Aggregator can be con fi gured to collect data from up to ten
RFM220 instruments at a time. Only one RFM220 Aggregator should connect
to an individual RFM220 instrument at a time. Multiple RFM220 Clients can
connect to the RFM220 Aggregator at a time.
The RFM220 Aggregator con fi guration can be changed using the
Con fi guration.xml fi le, which controls communications between the RFM220
system components (instrument, Aggregator, Client). The fi le can be updated
dynamically, meaning that it can be updated while the RFM220 Aggregator is
running.
RFM220 Client application.
The RFM220 Client application allows the user to
view the monitoring data collected by the RFM220 Aggregator application.
The data available for viewing includes event logs, metrics of signal
parameters, device information such as the
fi rmware version installed
in the RFM220 instrument, and various graphs. You can view the data
from any RFM220 instrument that the RFM220 Aggregator is monitoring.
Multiple RFM220 Clients can be connected at the same time to a single
RFM220 Aggregator.
MTM400A DTV Monitor (TS monitoring). All RF-related monitoring of the
input signal is performed by the RFM220 system. If you also want to perform
TS-related monitoring of the input signal, you can route the output signal from
the RFM220 instrument to a TS analyzer such as the Tektronix MTM400A
DTV Monitor. (See page 75,
Connecting to an MTM400A DTV Monitor .)
RFM220 Device Setup utility.
The RFM220 Aggregator software includes the
RFM220 Device Setup utility. This utility allows the administrator of the
RFM220 system to connect to a RFM220 instrument to perform the following
tasks:
View and change the network settings
View and change the secondary trap address and port number (for use
with an NMS system)
Restart the instrument
Reset the instrument settings back to the default values
Upgrade the instrument fi rmware
View the type of instrument and the installed hardware and fi rmware
versions
4 RFM220 User Manual