manualshive.com logo in svg

Tektronix RFM150, Инструкция по эксплуатации, Страница: 251 / 278

Поделиться
Скачать
Tektronix RFM150 Скачать руководство пользователя страница 251

RFM 150 Instruction Manual

C–1

Appendix C: Printed Report Formats

The RFM 150 can send printed reports directly to a portable printer
or a traditional line printer.

This manual section describes the printed reports. For more
information on printer types and hookups, refer to Appendix B.

Line Length

To ensure compatibility with portable, battery-operated printers, line
length is limited to 40 characters.

Header

Each print report begins with a header, which is preceded and
followed by a horizontal line of 40 dash characters. The header
contains three lines for a stand-alone measurement or four lines for a
measurement that is part of a sequence. Header information includes
the result type, channel table name, date and time of measurement,
temperature, site name, and sequence information (if applicable).

To view the information that will be printed in the header, press the
following sequence: STORE–RSLTS MENU–VIEW–STORED
INFO. To ensure that the correct temperature and site name will be
printed, enter this information in the Store menu before you take the
measurement. If you have not entered a temperature, the temperature
field will be replaced by the text “???”. If you have not entered a site
name, the site name field will be left blank.

Measurement Information

Measurement information follows the header. To view this
information on screen, press STORE, then select RSLTS MENU and
VIEW.

RFM 150 Instruction Manual

C–1

Appendix C: Printed Report Formats

The RFM 150 can send printed reports directly to a portable printer
or a traditional line printer.

This manual section describes the printed reports. For more
information on printer types and hookups, refer to Appendix B.

Line Length

To ensure compatibility with portable, battery-operated printers, line
length is limited to 40 characters.

Header

Each print report begins with a header, which is preceded and
followed by a horizontal line of 40 dash characters. The header
contains three lines for a stand-alone measurement or four lines for a
measurement that is part of a sequence. Header information includes
the result type, channel table name, date and time of measurement,
temperature, site name, and sequence information (if applicable).

To view the information that will be printed in the header, press the
following sequence: STORE–RSLTS MENU–VIEW–STORED
INFO. To ensure that the correct temperature and site name will be
printed, enter this information in the Store menu before you take the
measurement. If you have not entered a temperature, the temperature
field will be replaced by the text “???”. If you have not entered a site
name, the site name field will be left blank.

Measurement Information

Measurement information follows the header. To view this
information on screen, press STORE, then select RSLTS MENU and
VIEW.

Содержание RFM150























































































































































































































































































Отзывы:

Нет отзывов