Tektronix RFM150 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 278

Tektronix RFM150 Скачать руководство пользователя страница 16

General Safety Summary

xii

RFM 150 Instruction Manual

ATTENTION

Refer to Manual

Double

Insulated

To Avoid Fire or Shock Hazards

Use the Proper AC Adapter

Use only the specified AC adapter provided with this product to
connect it to the mains (local AC) supply.

Use an Appropriate Power Source

Do not operate this product from any power source that applies more
than the specified voltage.

Do Not Open the RFM 150 Case

This instrument contains weatherproofing seals, which, if damaged
or not installed properly, may fail to protect the instrument.

Do not open the instrument during the warranty period; return it to a
Tektronix Service Center for all service.

After the warranty period, the instrument may be opened by qualified
service personnel who have read the service instructions in this
manual.

Do Not Replace the Battery

This instrument uses a smart charge system, which prolongs battery
life. If the operating time from a full charge seems significantly
shortened during the warranty period, contact a Tektronix Service
Center to have the battery replaced.

After the warranty period, the battery may be replaced by qualified
service personnel who have read the service instructions in this
manual.

General Safety Summary

xii

RFM 150 Instruction Manual

ATTENTION

Refer to Manual

Double

Insulated

To Avoid Fire or Shock Hazards

Use the Proper AC Adapter

Use only the specified AC adapter provided with this product to
connect it to the mains (local AC) supply.

Use an Appropriate Power Source

Do not operate this product from any power source that applies more
than the specified voltage.

Do Not Open the RFM 150 Case

This instrument contains weatherproofing seals, which, if damaged
or not installed properly, may fail to protect the instrument.

Do not open the instrument during the warranty period; return it to a
Tektronix Service Center for all service.

After the warranty period, the instrument may be opened by qualified
service personnel who have read the service instructions in this
manual.

Do Not Replace the Battery

This instrument uses a smart charge system, which prolongs battery
life. If the operating time from a full charge seems significantly
shortened during the warranty period, contact a Tektronix Service
Center to have the battery replaced.

After the warranty period, the battery may be replaced by qualified
service personnel who have read the service instructions in this
manual.

«
...
14
15
16
17
18
...
»

Содержание RFM150























































































































































































































































































Отзывы:

Нет отзывов