Operating Basics
8.
Push
Enter
.
9.
Push
Esc
to exit the menu system.
NOTE.
The default maximum voltage is the full voltage range of the particular power supply being used.
Recall the Power Supply ON/OFF Output State at Power On (>OUT RECALL)
This parameter determines the initial On or Off output state after the power supply is powered on. If you select
On
, the power
supply will restore the state of the output to that which was in use before the power was last turned off. If the output was
turned
On
when the power supply is turned off or loses power then the output will return to the
On
state when the power
supply is turned back on or power is restored.
Off
will disable this function and the output channel will always be set
to
Off
after the power supply is powered on.
To enable or disable this control,
1.
Push the
Menu
.
2.
Use the down arrow key to select
OUT RECALL
.
3.
Push
Enter
.
4.
Use the up arrow key to select
On
or
Off
.
5.
Push
Enter
.
6.
Push
Esc
to exit the menu system.
NOTE.
The default selection is set to Off.
Recall the Power Supply Operating Parameters at Power On (>SAVE LAST)
This parameter determines whether the power supply saves its most recent settings, such as voltage and current, and
restores these settings at power on. If you set this parameter to
Off
then the power supply returns to the default settings
at power on. If you select
On
, the power supply will restore the state to that which was in use before the power was
last turned off.
To enable or disable this control,
1.
Push
Menu
.
2.
Use the down arrow key to select
Save Last
.
3.
Push
Enter
.
4.
Use the arrow keys to select
On
or
Off
.
5.
Push
Enter
.
6.
Push
Esc
to exit the menu system.
NOTE.
The default selection is set to On.
PWS2185, PWS2323, PWS2326, and PWS2721 User Manual
13
Содержание PWS2185
Страница 2: ......
Страница 3: ...PWS2185 PWS2323 PWS2326 and PWS2721 Linear DC Power Supplies ZZZ User Manual xx...
Страница 6: ......
Страница 8: ...Table of Contents ii PWS2185 PWS2323 PWS2326 and PWS2721 User Manual...