Operating Basics
Function button descriptions (cont.)
Button
Description
Recalls a saved setting from a speci
fi
ed setup memory location (1 to 20). Select the memory location
with the multipurpose knob, the up or down arrow keys, or the numeric keypad. The power supply
recalls the settings after you push
Enter
.
Use to access the following power supply settings: Reset All, Max Volt, Key Lock, Out Recall, Save
Last, Key Beep, and Sys Info. Push
Enter
to select the displayed menu item.
Turns on or off the output channel of the power supply. The regulation mode, constant voltage (CV) or
constant current (CC), is shown on the display when the output is turned on.
Backs out of the selected function. If the instrument’s focus is in a menu, pushing
Esc
will back up
one menu level.
Menu button descriptions
Primary
Menu
Secondary Menu
Description
Returns the instrument to the factory default setup values.
Yes
Select to return the instrument to the factory default setup values and then press
the
Enter
button
Reset All
No
Select if you do not want to return the instrument to the factory default setup values
and then press the
Enter
button
Max Volt
Sets the maximum output voltage value to which you can set the instrument
Key Lock
When activated, this feature locks the front panel controls and prompts for a
password to enable settings changes. This feature does not lock the power switch
or the output on/off switch.
Out Recall
On (Def)
Off
Sets the power output On/Off state after power up. “On” restores the state to that
which was in use before the power was last turned off. “Off” disables this function
and con
fi
gures the output channel to power up on the off state.
Save Last
On (Def)
Off
Recalls the operating parameters of the power supply after power up. It does this by
saving the last setting of operating parameters before you turn the instrument off
and then restoring the saved setting when you turn the instrument back on.
NOTE.
Wait 3 seconds after changing the settings to allow the settings to be
completely stored before powering off the instrument
Key Beep
Turns on or off a beeper sound when you push a button or press a key. “On”
enables the key sound. “Off” disables it.
Sys Info
Provides instrument information including model number, serial number, and
software version.
Display messages
Symbol
Description
OFF
The power supply output is off
8
PWS2185, PWS2323, PWS2326, and PWS2721 User Manual
Содержание PWS2185
Страница 2: ......
Страница 3: ...PWS2185 PWS2323 PWS2326 and PWS2721 Linear DC Power Supplies ZZZ User Manual xx...
Страница 6: ......
Страница 8: ...Table of Contents ii PWS2185 PWS2323 PWS2326 and PWS2721 User Manual...