Tektronix PSC1125, Инструкция по эксплуатации

Страница: 60 / 92

Maintenance
7-8
PSC 1125 Digital Television Parallel-to-Serial Converter Instruction Manual
Removal and Installation Procedures
This subsection describes removing and installing mechanical and electrical
modules.
This subsection contains the following information:
Safety and ESD information needed to properly do the procedures that
follow
A list of equipment required when removing modules
Procedures for removing and installing electrical and mechanical modules
To avoid possible personal injury or damage to converter compo-
nents, read the Installation subsection on page 1–3 and Preventing ESD on
page 7–2. Before doing this or any other procedure in this manual, read the
General Safety Summary and the Service Safety Summary, beginning on
page v near the beginning of this manual.
To avoid possible personal injury or death, disconnect the power cord from the
line voltage source before doing any procedures in this section.
List of Mechanical Parts.
Refer to the Replaceable Parts List beginning on
page 8–1 for all mechanical parts in the converter.
Equipment Required.
Table 7–4 lists the tools required to remove and reinstall the
modules of the converter.
Table 7-4: Equipment required
Name Description
Preparation