Tektronix PSC1125, Инструкция по эксплуатации

Страница: 37 / 92

Performance Verification
PSC 1125 Digital Television Parallel-to-Serial Converter Instruction Manual
4-5
!
#!
$#
! !
%
%
! "
!
%
!!
Figure 4-1: Performance check initial hookup
2. Set the TSG1001generator signal output to ZONE PLATE and format to
SMPTE 274M.
3. Set the digital TV waveform monitor interface format to SMPTE 274M.
4. Check the displayed waveform and CRC error:
a. Confirm that the waveform is correctly displayed on the digital TV
waveform monitor.
b. Check that the CRC ERROR LED on the digital TV waveform monitor
does not light.
5. Check the OUT2 output:
a. Select CH B input channel in the digital TV waveform monitor.
b. Preform step 4 to check the OUT2 output.
6. Change the TSG1001 generator signal output format to SMPTE 296M.
7. Set the digital waveform monitor interface format to SMPTE 296M.
8. Repeat steps 4 and 5 for SMPTE 296M.