manualshive.com logo in svg

Tektronix PS2520, Руководство пользователя

Поделиться
Скачать
Tektronix PS2520 Скачать руководство пользователя страница 18

Getting Started

4

PS2520, PS2520G, PS2521 & PS2521G User Manual

5. Turn the power on. The display indicators will flash briefly. The

voltage and current readouts show the output settings. You should
also hear the cooling fan running whenever the power is on.

The power supply performs a diagnostic self test at power on. If the
diagnostic self test detects a problem, the unit displays an error code
number in the form “Err –xxx.” If you encounter an error code, refer
to Troubleshooting on page 32.

General Procedure

Use the following general procedure to connect one or more of the
power supply outputs to a load. This procedure allows you to use the
power supply safely. More information about each step is in
Operating Basics on page 5.

1. Turn the power supply off and remove any connections on the

outputs.

2. Turn the power supply on.

3. Select the output you want to configure. Refer to Selecting the

Output on page 7.

4. Set the protection levels for the selected output. Refer to Setting

the Protection Levels on page 8.

5. Set the voltage and current limit for the selected output. Refer to

Setting Voltage and Current Limits on page 9.

6. Repeat steps 3 through 5 for the remaining outputs.

7. Turn the power supply supply off.

8. Connect the output(s) to the load(s). Refer to Connecting the

Outputs on page 11.

9. Turn the power supply on.

10. Enable the outputs. Refer to Enabling the Outputs on page 20.

Содержание PS2520

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды