Tektronix Phasershare Printer, Сетевое руководство

Страница: 53 / 184

PhaserShare Networking Manual 45
PhaserShare Administrator Software for NetWare Networks
5
Installation methods
The installer supports the following installation methods:
■
Standard install. This is the recommended installation method; it copies
the necessary files to your workstation’s hard disk. All program features
are installed automatically using standard settings.
■
Network install. This method allows you to specify a drive and directory
on a NetWare file server in which to place the files needed for the
installation. You can then install the software from that directory to
designated workstations using the standard install.
Installation procedure
Installation for Phaser 840, 740, and 780 printers
1.
Put the printer’s software CD-ROM into the CD-ROM drive.
■
If the Windows autorun feature is enabled, the CD-ROM launches
automatically.
■
If the Windows autorun feature is disabled, double-click My
Computer
, then double click the CD icon to launch the CD-ROM.
2.
View the brief introductory information, then click Install Drivers to
launch the installer.
3.
When you are prompted to select Easy Install or Custom Install, select
Custom Install
.
4.
During custom installation, a dialog box is displayed enabling you to
install the PhaserShare Administrator. Follow the on-screen prompts to
complete the installation.
Installation for Phaser 360 printers
1.
Locate and run the file SETUP.EXE on the printer’s CD-ROM or on printer
software diskette 1.
2.
When you are prompted to select Easy Install or Custom Install, select
Custom Install
.
3.
During the custom installation, a dialog box is displayed enabling you to
install the PhaserShare Administrator. Follow the on-screen prompts to
complete the installation.
N
O T E
The drive you specify should be a NetWare shared drive. You must have write
access to the directory you specify.