Tektronix Phasershare Printer, Сетевое руководство

Страница: 177 / 184

PhaserShare Networking Manual
169
Chapter
17
FTP Interface
Your printer’s FTP interface is a standard FTP server. Using FTP, you can send a job
to the printer, where it is printed (not stored). No password is required. You can
save a PostScript file from an application and send the file to a remote printer over a
network or the Internet using an FTP program.
The printer’s FTP directory is PRINTER:1 , and any files sent there are automatically
passed to the printer.
The printer’s FTP parameters can be changed using PhaserLink Printer Management
Software. For more information on PhaserLink software, see Chapter 12,
“PhaserLink Printer Management Software”.
The following table lists the supported FTP commands.
Supported FTP commands
Request Description
ABOR Abort previous command.
HELP Give help information.
MODE Specify data transfer mode.
NOTE: With the PhaserShare FTP interface, the only transfer
mode is Stream.
NOOP Do nothing.
PASS Specify password.
PASV Get the server’s IP address and port number.
PORT Specify data connection port.
PUT Send a file to the printer.
PWD Print the current working directory.
QUIT Terminate session.
STAT Report current status.
NOTE: With the PhaserShare FTP interface, optional arguments
to this command are ignored.
STOR Store a file.
STRU Specify a data transfer structure.
NOTE: With the PhaserShare FTP interface, only File and
Record structures are allowed; the default is File.