Current transducer instructions
To avoid
fi
re or personal
injury
Avoid exposed circuitry. Do not touch exposed connections and components
when power is present.
Connect and disconnect properly.
De-energize the circuit under test before
connecting or disconnecting the product. Do not use the product for measurements
on any wire that carries voltages above the product’s voltage rating.
Do not operate with suspected failures.
If you suspect that there is damage to this
product, have it inspected by quali
fi
ed service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged or
operates incorrectly. If in doubt about safety of the product, disconnect it. Clearly
mark the product to prevent its further operation.
Before use, inspect the product for mechanical damage, examine the exterior of
the product for cracks. Do not use if cracked or otherwise damaged.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Warranty information
For warranty information, go to www.tektronix.com/warranty.
PA4000 Power Analyzer
7