Current transducer instructions
Standard accessories
The cables and adapters that ship with the transducers are listed in the table below.
Transducer standard accessories
Transducer part number
Interface cable
Cable adapter (transducer)
Cable adapter (external power)
CT-100-M
174-6354-00
174-6353-00
—
CT-200-M
174-6354-00
174-6353-00
—
CT-500-M
174-6354-00
174-6353-00
—
CT-1000-M
174-6354-00
174-6353-00
—
CT-60-S
174-6354-00
—
—
CT-200-S
174-6354-00
—
—
CT-400-S
174-6354-00
—
—
CT-1000-S
174-6354-00
—
174-6436-00
Installation
WARNING.
To reduce risk of shock or
fi
re, refer to the PA4000 Power Analyzer
User Manual, Tektronix part number 077-0815-xx, before using the transducers
and power analyzer.
The PA4000 Power Analyzer User Manual contains a complete list of
speci
fi
cations and operating information for the power analyzer.
The transducers that are covered in these instructions all use a 1.3–meter long
interface cable that connect to the 1 A and ALO inputs on the rear of the PA4000.
However, depending on the transducer series and model, an adapter may be
included to complete the connection to the transducer or to an external power
supply.
If your application requires a cable length greater than 1.3 meters, a standard
DB-sub 9 extender cable may be used.
The interface cable that is supplied with the transducers includes a 3-pin power
connector that connects to the rear panel of the power analyzer. All transducers
except the CT-1000-S model are powered by the PA4000 internal supply.
2
PA4000 Power Analyzer