manualshive.com logo in svg

Tektronix MTX100A, Руководство пользователя

Поделиться
Скачать
Tektronix MTX100A Скачать руководство пользователя страница 247

Appendix C: Using the Scheduler Application (Option SC Only)

MTX100A MPEG Recorder & Player User Manual

C-17

„

TIME:

 The schedule playing or recording starts by an absolute starting 

time. When you select this option, spin boxes to set date and time become 
available.

„

Start Options:

 Sets the actual time when the schedule starts.

„

Top of Schedule:

 The schedule playing or recording starts with the first 

stream in the schedule list.

„

Skip to Selection:

 The schedule playing or recording starts at the currently 

highlighted stream. If no stream is highlighted, the schedule will start at the 
top of the schedule list. This option is only available when you select 
Immediate in the Active Schedule field.

„

Resyncronize Start:

 The start time of the first stream is adjusted to equal 

to the current time (the first stream must have an absolute Start Time 
specified). This option is only available when you select Immediate in the 
Active Schedule field.

„

Stop Time:

 Sets the way in which the schedule stops playing or recording.

„

NONE:

 The schedule plays or records through according to the start and 

stop times of the individual streams.

„

Schedule:

 The schedule playing or recording stops at the specified date 

and time but not until the current (schedule) pass is completed. When you 
select this option, spin boxes to set date and time become available.

„

Stream:

 The schedule playing or recording stops at the specified date and 

time but not until the current stream is completed. When you select this 
option, spin boxes to set date and time become available.

„

Absolute:

 The schedule playing or recording stops immediately at the 

specified date and time. When you select this option, spin boxes to set date 
and time become available.

NOTE. 

If the trigger does not occur within a specified time, the subsequent stream 

will be played out or recorded.

Содержание MTX100A























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды