Clear and Sanitize a Nonfunctional Instrument
If your instrument is not functioning and you need to clear or sanitize it, proceed
as follows:
NOTE.
The Analog board must be calibrated with the Main board by Tektronix.
Please contact Tektronix before returning your instrument.
1.
Remove the USB
fl
ash drive from your oscilloscope. Refer to your company's
internal policies regarding handling or disposal of the
fl
ash drive.
2.
Remove the Main board from your oscilloscope. For removal instructions,
refer to the Service manual for the instrument, which is available on the
Tektronix Web site at www.tektronix.com/manuals. Refer to your company's
internal policies regarding handling or disposal of the board.
3.
Return the oscilloscope to Tektronix. A new Main board will be installed,
and the oscilloscope will be repaired. The oscilloscope will be adjusted as
necessary, which includes adjusting (calibrating) the new Main board and
the Analog board together.
4.
Replacement of any missing hardware will be charged according to the rate
at the time of replacement.
Declassi
fi
cation and Security Instructions
13
