Tektronix MDO4000C Series, Руководство пользователя

Страница: 79 / 160

Triggering on buses
You can use your oscilloscope to trigger on multiple data buses, if you have the
appropriate application module installed. The MDO4000C Series with Option
MDO4MSO can trigger on parallel buses without an application module. The
oscilloscope can display both the physical layer (as analog waveforms) and the
protocol level information (as digital and symbolic waveforms).
To set up the bus trigger:
1. If you have not already defined your bus using the front panel B1 , B2 , or B3
buttons, do so now.
2. Push Trigger Menu .
3. Push Type .
4. Turn multipurpose knob a to scroll through the trigger type side menu until
you select Bus .
5. Push Source Bus and use the Source Bus side menu to select the bus that you
want to trigger on.
6. Push Trigger On and select the desired trigger on feature from the side
menu.
Trigger setup
MDO4000C Series Oscilloscope User Manual 57
Preliminary