Tektronix MDO4000C Series, Руководство пользователя

Страница: 126 / 160

Naming your file
The oscilloscope gives all files it creates a default name in the following format:
■ tekXXXXX.set for setup files where XXXXX is an integer from 00000 to
99999
■ tekXXXXX.png, tekXXXXX.bmp, or tekXXXXX.tif for image files
■ tekXXXXYYY.csv for spreadsheet files or tekXXXXYYY.isf for internal
format files
For waveforms, the XXXX is an integer from 0000 to 9999. The YYY is the
channel of the waveform, and can be one of the following:
■ CH1, CH2, CH3, or CH4 for the analog channels
■ D00, D01, D02, D03, and so on through D15 for the digital channels
■ MTH for a math waveform
■ RF1, RF2, RF3, or RF4 for reference memory waveforms
■ ALL for a single spreadsheet file containing multiple channels when you
select Save All Waveforms
For RF traces (models with option SA3 or SA6 installed), XXXX is an integer
from 0000 to 9999. The YYY defines the trace and can be one of the following:
■ NRM for a normal trace
■ AVG for an average trace
■ MAX for a maximum hold trace
■ MIN for a minimum hold trace
■ AVT for an amplitude versus time trace
■ FVT for a frequency versus time trace
■ PVT for a phase versus time trace
■ TIQ for a baseband I & Q file
NOTE.
Analog, digital, and RF waveforms and traces and those waveforms and
traces derived from them (such as math and reference) can be saved to an ISF
file. When saving all channels in ISF format, a group of files will be saved. Each
will have the same value for XXXX, but the YYY values will be set to the different
channels that were turned on when the Save All Waveforms operation was
performed.
The XXXX value will automatically increment each time you save a file of the
same type. For example, the first time you save a file, that file is named
tek00000. The next time you save the same type of file, the file will be named
tek00001.
Save and recall information
104 MDO4000C Series Oscilloscope User Manual
Preliminary