Tektronix Keithley KPCI-488LPA, Быстрый старт, Страница: 9 / 14

KPCI-488LPA GPIB Controller Interface Card Quick Start Guide
KPCI-488LPA-903-01 Rev. B / January 2020
9
Using the Keithley GPIB Configuration Utility
The Keithley GPIB Configuration Utility allows you to configure the following settings:

KPCI-488LPA bus address

Bus timing

I/O timeout

Set the KPCI-488LPA to be a system controller

Enable autopolling
To launch the configuration utility:
1. From Microsoft Windows, select Start > All Programs .
2. From the programs selection, select Keithley Instruments > KI-488 > KI-488 Configuration Utility . The
Keithley GPIB Configuration Utility window will open. The utility queries the GPIB bus for instruments and
displays the response to the identification query for any discovered instruments.
Figure 7: Keithley GPIB Configuration Utility