Models 707B and 708B Switching Matrix Reference Manual
Section 7: TSP command reference
707B-901-01 Rev. B / January 2015
7-95
lan.config.dns.domain
Configures the dynamic DNS domain.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
""
Usage
domain
= lan.config.dns.domain
lan.config.dns.domain =
domain
domain
Dynamic DNS registration domain; use a string of 255 characters or less
Details
This attribute holds the domain to request during dynamic DNS registration. Dynamic DNS
registration works with DHCP to register the domain specified in this attribute with the DNS server.
The length of the fully qualified host name (combined length of the domain and host name with
separator characters) must be less than or equal to 255 characters. Although up to 255 characters
are allowed, you must make sure the combined length is also no more than 255 characters.
Example
print(lan.config.dns.domain)
Outputs the present dynamic DNS domain. For
example, if the domain is "Matrix", the response
would be:
Matrix
Also see
(on page 7-95)
(on page 7-96)
(on page 7-101)
lan.config.dns.dynamic
Enables or disables the dynamic DNS registration.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.ENABLE)
Usage
state
= lan.config.dns.dynamic
lan.config.dns.dynamic =
state
state
The dynamic DNS registration state. It may be one of the following values:
1
or
lan.ENABLE
: Enabled
0
or
lan.DISABLE
: Disabled