Test
5. Turn the
navigation wheel
to set the source value to
20.0000 V
,
then press the
navigation wheel
to enter
the selection and exit EDIT mode.
SrcA:+20.0000 V LimA:1.00000 A
AUTO
Source value set to 20.0000 V
Set the source limit
1. Press the
LIMIT
key to display a blinking character in the
LimA
value field.
2. Press the down
RANGE
key to select the 10 mA limit
range. Verify that the source limit value in the LimA field
is
10.0000 mA
.
SrcA:+20.0000 V LimA:10.0000mA
AUTO
Source limit set to 10.0000mA
Set measurement function and range
1. Press the
MEAS
key until the V (voltage) measurement
function is selected. In the following figure, the
measurement function is set to
V
.
SrcA:+20.0000 V LimA:10.0000mA
AUTO
Measurement function set to voltage (V)
2. Press the
AUTO
key as many times as needed to select
the AUTO range function. When AUTO is selected, the
2601B-PULSE automatically selects the best range for
the measured value. You briefly see the display shown
below, then the main display screen reappears.
SrcA:+20.0000 V LimA:10.0000mA
AUTO
AUTO
