Tektronix H600 RFHawk, Руководство по обслуживанию

Страница: 27 / 109

Performance Veri fi cation
Audio Test Check the external microphone and speaker operation.
1. Plug a microphone into the external microphone jack.
2. Select Audio Test ; then select Run .
3. When prompted, speak into the microphone for approximately 5 seconds.
The device will then automatically play back your message.
4. Listen to the playback and verify its accuracy. The test fails if there is no
output or if the audio is signi
fi cantly distorted.
5. Report a Pass or Fail when prompted.
A Test failed is recorded in the Failure Log if the user does not enter a pass/fail
response when prompted.
PCMCIA Slot 1 Test Check the PCMCIA controller connection to an ATA fl ash card in Slot 1. The test
uses standard API functions to create a fi le on the device, write data to the fi le,
read the fi le back, and validate the data.
NOTE.
This test requires two PCMCIA ATA fl ash memory cards. Both cards must
be installed for the test to run successfully.
1. Install two PCMCIA ATA fl ash memory cards, one in each of the PCMCIA
card slots.
2. Select PCMCIA Slot 1 Test , then tap Run .
A Test failed is recorded in the Failure Log if a memory card is not installed
when prompted.
PCMCIA Slot 2 Test Check the PCMCIA controller connection to an ATA fl ash card in Slot 2. Uses
standard API functions to create a fi le on the device, write data to the fi le, read the
fi le back, and validate the data.
NOTE. NOTE. This test requires two PCMCIA ATA fl ash memory cards. Both
cards must be installed for the test to run successfully.
1. Install two PCMCIA ATA fl ash memory cards in the PCMCIA card slots.
2. Select PCMCIA Slot 2 Test ; then select Run .
A Test failed is recorded in the Failure Log if a memory card is not installed
when prompted.
H600 & SA2600 Service Manual 1–9