G10 Installation Guide 7.13.2
45
2
Install Hardware and Power Cabling
Rev. 005-140228
Terminal and Wiring Recommendations
This section provides wiring and lug recommendations for the Fuse Panel. Refer to the
G10
Hardware Maintenance Guide
for technical specifications of the fuse panel.
provides specifications for wiring and lugs that Tektronix provides with the G10.
contains wiring and lug recommendations for the Fuse Panel.
G10 H
ARDWARE
C
OMPONENT
N
AME
R
EFERENCE
Table 2.4
lists the naming conventions used to identify the various G10 components.
Table 2.2 - G10 to Fuse Panel Wiring and Lug Specifications
G10 Terminal
Wire Specifications
Fuse Panel Lug Specifications
Power Input (-48VDC or -60VDC)
Connect to - Terminal (negative)
#12 AWG
Tyco 329697 or equivalent
Connect to the #6 screw on the fuse
panel
Return
Connect to + Terminal (positive)
#12 AWG
Tyco 329697 or equivalent
Connect to the #6 screw on the fuse
panel
Earth Ground
Connect to Burndy YAV102TC10-90 lug
#12 AWG
Burndy YAV102TC10-90 or equivalent
Table 2.3 - Fuse Panel Wiring and Lug Recommendations
Terminal
Wire Recommendations
(Customer Provides)
Lug Recommendations
(Tektronix Provides)
Power Input (-48VDC or
-60VDC)
Use input wire size appropriate for
total output loading on panel
Use #2 AWG for 100A input
Straight dual-hole lugs for 1/4” studs on
5/8” centers (Panduit LCDN2-14A-Q for
#2 AWG or equivalent)
Return
Use input wire size appropriate for
total output loading on panel
Use #2 AWG for 100A input
Straight dual-hole lugs for 1/4” studs on
5/8” centers (Panduit LCDN2-14A-Q for
#2 AWG or equivalent)
Earth Ground
Use #8 AWG or greater
90° dual-hole lugs for #10 studs on 5/8”
centers (Burndy YA8CL2TC10-90 or
equivalent)
Table 2.4 - G10 Component Names
Component
Current Name
Blades
Carrier Blade (see Iris Interface Cards)
CAB100
Iris Interface Cards
IIC100
IIC200
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
