Clear and Sanitize a Non-Functional Instrument
Clear and Sanitize a Non-Functional Instrument
If your instrument is not functioning and you need to clear or sanitize it, proceed
as follows:
Acquisition board
Only quali
fi
ed personnel should perform service procedures. Read the
Service
Safety Summary
and the
General Safety Summary
in the
DPO2000 and MSO2000
Series Digital Phosphor and Mixed Signal Oscilloscopes Service Manual
before
performing any service procedures.
Remove the Acquisition board and return the product to Tektronix. A new
Acquisition board will be installed, and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refer to the service manual, part number 071-2331-XX,
available on the Tektronix Web site at www.tektronix.com/manuals.
After removal of the Acquisition board, refer to your company's internal policies
regarding handling or disposal of the board.
USB Flash Drive
Remove the USB
fl
ash drive and return the instrument to Tektronix for repair.
After removal of the USB
fl
ash drive, refer to your company's internal policies
regarding handling or disposal of the
fl
ash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at
the time of replacement.
DPO2000/B and MSO2000/B Series Declassi
fi
cation and Security Instructions
7
