Getting Acquainted with the Oscilloscope
11. R
. Push to manage reference waveforms, including the display or removal of
each reference waveform from the display.
12. M
. Push to manage the math waveform, including the display or removal of
the math waveform from the display.
Using Other Controls
These buttons and knobs control waveforms, cursors, and other data input.
1.
Turn the upper multipurpose knob
a
, when activated, to move a cursor, to set a
numerical parameter value for a menu item, or to select from a pop-out list of
choices. Push the
Fine
button to toggle between coarse and
fi
ne adjustment.
Screen icons tell you when
a
or
b
are active.
2.
Cursors
. Push once to activate the two vertical cursors. Push again to turn on
the two vertical and two horizontal cursors. Push again to turn off all cursors.
When the cursors are on, you can turn the multipurpose knobs to control
their position.
3.
Select
. Push to activate special functions.
For example, when using the two vertical cursors (and no horizontal ones are
visible), you can push this button to link or unlink the cursors. When the two
vertical and two horizontal cursors are both visible, you can push this button
to make either the vertical cursors or the horizontal cursors active.
4.
FilterVu
. Push to
fi
lter unwanted noise from your signal and still capture
glitches.
5.
Fine
. Push to toggle between making coarse and
fi
ne adjustments with the
vertical and horizontal position knobs, the trigger level knob, and many
operations of multipurpose knobs
a
and
b
6.
Intensity
. Push to enable multipurpose knob
a
to control waveform display
intensity and knob
b
to control graticule intensity.
7.
Turn the lower multipurpose knob
b
, when activated, to move a cursor or set a
numerical parameter value for a menu item. Push
Fine
to make adjustments
more slowly.
MSO2000B and DPO2000B Installation and Safety Instructions
27
Содержание DPO2000B Series
Страница 2: ......
Страница 73: ...オシロスコープの概要 MSO2000B and DPO2000B Installation and Safety Instructions 67 ...
