manualshive.com logo in svg

Tektronix AWG70001B, Инструкции по установке и безопасности, Страница: 31 / 50

Поделиться
Скачать
Tektronix AWG70001B Скачать руководство пользователя страница 31

Windows interface guidelines

Because the instrument uses the Microsoft Windows interface, you have open access to the Windows operating system. You can
access the Windows desktop to load and run other Windows-based applications such as Microsoft Excel.

Follow these guidelines to avoid making operating system changes that might cause problems while using the instrument:

■

Be careful when making changes in the Control Panel. Avoid making changes to any controls with which you are unfamiliar.

■

Do not delete or change any system fonts; this can affect the quality of the display.

■

Be careful when making changes to the system Display properties. Changing settings such as resolution, text size, fonts,
and orientation affects the usability of the display and the touchscreen. 

■

Do not change the contents of the Windows folder or the Program Files\Tektronix\AWG70000\ folder.

■

Do not change the BIOS settings; this can affect the overall operation of the instrument.

 

Install the instrument

AWG70000B Series Installation and Safety Instructions 

15

Содержание AWG70001B



















































Отзывы:

Нет отзывов