Standard Waveshapes
Sine, square, triangle, ramp, pulse, arbitrary, linked sequence, and DC.
Arbitrary Waveforms
Memory
Waveform:
1 Mwords x 8-Bits (4 Mwords x 8-Bits with Option 01).
Marker:
1 Mwords x 2-Bits (4 Mwords x 2-Bits with Option 01).
Data Points of Waveform:
32 to 1 M ( 4 M with Option 01) in multiples of 32.
Clock Generator
Frequency Range:
1.000000 kHz to 1.024000 GHz.
Resolution:
7 digits.
Stability:
1 ppm/year (+15 to ± 25 degrees C).
Operating Modes
Continuous:
Output waveform/sequence continuous at programmed waveshape, frequency, amplitude,
and offset.
Triggered:
Output quiescent until triggered by an external, GPIB, or manual trigger; generates a
waveform/sequence only one time.
Burst:
Output quiescent until triggered by an external, GPIB, or manual trigger; then generates a
waveform/sequence up to 65,536 times.
Gated:
Same as continuous mode except period is executed only for the duration of the gated signal
until the sequence started is completed.
Waveform Advance:
Output quiescent until triggered by an external, GPIB, or manual trigger, then
generates the waveform/sequence in the Sequence file. When the scan count reaches value, output
stops and waits for next trigger.
Auto Step:
Continuously outputs the waveform/sequence in the Auto Step file; the next Auto Step
Trigger (rear panel) advances the waveform/sequence.
Slave:
Receives clock from a master arbitrary waveform generator for parallel operation.
Main Output
Digital-to-Analog Converter Resolution:
8-Bits.
Output Impedance:
50 ohm
Output Voltage:
-2.0 V to +2.0 V into 50 ohm.
Amplitude:
Range: 20 mV to 2 V into 50 ohm.
Resolution: 1 mV.
Offset:
Page 2 of 7
Tektronix: Products > AWG 2040 Arbitrary Waveform Generator
9/27/2007
http://ftp.tektronix.com/Measurement/Products/catalog/archive/ca-AWG2040/index.html
