Tektronix AD007, Руководство пользователя

Страница: 65 / 98

Reference
AD007 User Manual
51
Power On
Table 2 shows the sequence of status indications for power on. To
perform or repeat the power on sequence, unplug the power to the
adapter, wait a couple of seconds, then connect the power again.
Table 2: AD007 status indicators for power on
Power on status GPIB LAN L-Link Power
1. Off or power failure Ø Ø Ø Ø
2. Self testing (hardware) G/A G/A G/A G/A
3. Self test failure R/Ø R/Ø R/Ø A
A A A A
4. Self test pass G/Ø G/Ø G/Ø G
5. LAN Discovery loop
(DHCP/BOOTP request)
Note: By default, the DHCP/BOOTP
request continues to loop until serviced. To
exit the loop, momentarily press the reset
button. The adapter will load the last
configuration from memory. Ø
Ø
´
G/A A G
6. LAN OK Ø
Ø
´
G/A
G G
G = Green R = Red A = Amber
Ø
= Off/Idle
G/A = Toggles between green and amber
Ø
´
G/A = for LAN and GPIB, G indicates sending data, A indicates receiving
data,
Ø
indicates idle