Tektronix 1760 series, Руководство пользователя

Страница: 44 / 180

At A Glance
1760 Series Component Waveform/Vector Monitor User Manual
2-6
H
Without
PARADE
or
OVERLAY
selected,
only one input
selection can be made at a time. Each input channel
button (including
A123 / B123
)
toggles between
A
and
B
,
and is cancelled when another input button is
pressed.
H
With
PARADE
or
OVERLAY
selected, multiple input
selections can be made; input buttons select
A, B
,
both, or off, and do not cancel each other.
H
Selecting
A123
provides a side-by-side display of the
CH-A1
,
CH-A2
,
and
CH-A3
inputs (
B123
displays the
CH-B1
,
CH-B2
,
and
CH-B3
inputs). Selecting
A123
or
B123
turns off all other input channels. When
PARADE
or
OVERLAY
is selected,
A123
and
B123
can
be displayed together and in combination with other
inputs.
H
PARADE
displays up to four input channels side-by-
side, with any additional inputs overlaid. Selecting
PARADE
displays the input channel(s) last selected
for
PARADE ,
allowing a custom configuration of
inputs. In
PARADE
mode, the
LINE/FIELD
button
offers only two choices: one line and one field.
H
OVERLAY
provides an overlaid display of all se-
lected inputs.
MENU
Push the desired menu button to enter that menu and enable
the associated functions. Push the button again to exit the
menu and disable the function. Refer to page 3-7 for more
information about using menus.
H
FILTER
allows choice of flat or filtered display of the
waveform signal.
H
CURSOR
enables timing cursors, voltage cursors,
vector cursors and markers.
H
LIN SEL
allows the selection of a single line or group
of lines for display.