Position and Offset
The
attempts to maintain the user-selected offset
even though
theoffset
less
one volt will be maintained as the sensitivity is changed over the entire
range of 1
to 10 V/division. A
offset of greater than one
volt is
the offset range for the most sensitive settings
and
be
to
one volt when the sensitivity is increased to any value between 995
and
1
Limit
Two four-pole
bandwidth
filters are available
for each
channel.
of
filters is to reduce the amplitude
of unwanted noise of
occurring at
above the frequency of
the signal of interest. The
has a choice of cut-off
frequencies,
either 20 MHz or 100 MHz, independently for each
The bigger,
auxiliary
and display signal bandwidths for a channel are always the
The
is the signal
to the right plug-in compartment.
DC Circuit Loading
AC coupling capacitors are
differently in the
and
than
in the
and llA.34. Figure
shows this difference.
Figure 2-l. Location of AC
capacitors in plug-in amplifiers.
Supplement
llA34
2-3
