Technology Solutions
Instruction Manual
Tek-Wave 4300C
www.tek-trol.com
16
5.3.3
Menu Instruction
5.3.3.1
Basic Settings
•
These setting s are basic setup of the sensor such as minimum and maximum adjustment,
medium, damping etc.
•
Press to bring the sensor to program mode from run mode. Then the menu is displayed as
shown below
*Note: The menu item number is displayed on the top right corner.
5.3.3.1.1
Minimum Adjustment
•
Minimum adjustment setting regulates the linear scaled current output.
•
At main menu, select basic settings with
and press to confirm.
•
Press for edit the percentage value.
•
Press again to confirm the modification and furthermore you can edit the corresponding
distance value please refer edit parameter section to edit parameters.
5.3.3.1.2
Maximum Adjustments
•
Maximum adjustment setting regulates the linear scaled current output.
•
At main menu, select basic settings with and press
to confirm.
•
Press for edit the percentage value.
•
Press again to confirm the modification and furthermore you can edit the corresponding
distance value please refer edit parameter section to edit parameters.
OK
OK
OK
OK
OK
OK
OK
