Kona Macro User Guide
T0004279_UG
Version 1.1
TEKTELIC Communications Inc.
Confidential
Page 9 of 34
Figure 4: Kona Macro Gateway T0004252 Connector Field
All Kona Gateway module interconnect is located on the bottom facing bulkhead. The RF
connectors are water proof while un-mated but all other connectors must be terminated with
mating connectors or covered with the supplied protective cap when not in use in order to be
water tight. Connector types and their mating connectors are listed in Table 2.
Table 2: Kona Macro Gateway Interface Connector Types
Interface
QTY
Connector Type
Mating Connector
LoRa Antenna Ports
1 or 2 N-Type female
Industry standard N-Type male
3G/4G Modem
Backhaul Antenna Port
0 or 1 N-Type female
Industry standard N-Type male
Copper Ethernet Port
1
Threaded, circular, RJ-45
Shenzhen Chogori Technology Co., Ltd.
approved mating connector (p/n
33000111-02 or equivalent)
Direct DC Power Input
0 or 1 Threaded, circular, 2
Shenzhen Chogori Technology Co., Ltd.
GPS
Antenna
DC Power /
Fiber Hybrid
LoRa RF
Antenna 1
LoRa RF
Antenna 0
Enclosure
Vent
Protective
Earth
Ground
LED
Copper
Ethernet
