LoRa IoT Smart Room Sensor User Guide
T0006338_UG
Version 1.5
TEKTELIC Communications Inc.
Page 25 of 30
4.
The LoRa LED will now blink whenever LoRa activity occurs on the sensor (transmitting or
receiving packets, including the join request packets).
During normal operation:
•
The LoRa LED will blink whenever LoRa activity occurs on the sensor (transmitting or
receiving packets)
•
The System LED can be controlled via the downlink command interface.
NOTE:
Any other LED pattern behaviour not described above most likely indicates a low battery.
For example, if steps 1-2 repeat continuously, the battery no longer has enough charge to power
the join procedure.
4.4
Reset Button Function
There is a reset button on the device, that can be pushed by a pin, such as a paper clip (see
Figure 1-2). The button should not be pushed hard. The reset is instant, i.e. the button does not
need to be kept pushed. The reset restarts the microprocessor. All the FW load and
configuration parameters in the Flash are remembered during the reset.
